Before starting your recording session with the 1736 energy logger it is critical to setup the proper power configuration. The most common of these configurations would be either the WYE configuration.
Or the Delta configuration
To setup the configuration select the meter key on the 1736 and the display should look like the following image if you are in energy study mode you will see only current is visible in your display.
Tap change configuration
Select topology from the list by using the arrow keys and select the enter key or tap the screen.
From the presented list of power configurations select the appropriate power configuration using the arrow keys. Ideally if you have a neutral present it should be connected. The Delta configuration does not use the neutral connection. The WYE configuration will use the neutral.