This article is is meant to guide you through the process of downloading the Calibration Certificate for the Fluke TiS60+, Ti300+, Ti400+, Ti401 Pro, Ti480 Pro, TiX501, TiX580, RSE300, RSE600 Camera's.
In this example I used the TiS60+ but the process is the same for all the model numbers listed.
The process for getting the Certificate of Calibration is to have the TiS60+ connect to a PC using a USB cable and open either the Fluke Connect Desktop software or Smartview software both programs are compatible with your camera.
Here is the link to our web page to get the both of the software programs.
If you use Fluke Connect Desktop below is a screen shot of the program connected to a TiS60+ showing how to access the Certificate of Calibration. You click on the dropdown arrow and then click on the Download Camera Calibration Certificate.
If you use Smartview click on the dropdown arrow and then click on Download Calibration Certificate From Camera.
If are unable to see the TiS60+ show up in either program it means the USB driver did not install automatically. You will need to open another article named Installing RNDIS Driver.