Keeping your world up and running. ®

a3001 FC Wireless Extended User Manual

a3001 FC Wireless iflex Extended User Manual

 

 

mceclip0.png

 

Turning the a3000FC on with the Green Button. The a3001 FC will turn off automatically in 20min. Auto power off is disabled while logging.

mceclip1.png

 

 

 

Pressing the backlight button will illuminate the backlight.

mceclip2.png

 

 

Press the Hz button to toggle between frequency and amperage measurements.

mceclip3.png

 

 

 

Press the INRUSH button to capture motor inrush measurements. Connect your a3001 FC to your motor and press the INRUSH button. The display will read “----” and any signal greater than 100 ms will now be captured and displayed.

mceclip4.png

 

 

 

Press the LOG button to start logging. The MEM icon will appear in the lower right part of the display and will blink. The status bar located above MEM indicates available memory used (65,000 data points). No logging available with memory at 100%. The default logging interval is 15 min.

mceclip6.png

 

 

 

Press the Fluke Connect button to activate the wireless communication. The radio activation icon will appear on the upper left part of the display.

mceclip7.png

 

 

 

Battery charge indicator is in the lower left of the display.

mceclip8.png

 

 

 

Wireless Communication

 

Fluke Connect button allows wireless communication via Fluke Connect application (IOS, Android).

 

From the Home screen select “Connect and Capture Measurements”.

mceclip9.png

 

 

 

Select the device to connect.

mceclip10.png

 

 

 

A live reading will appear on display. Individual readings may be saved from the application by selecting SAVE. Trend recordings can be saved from the application by selecting the Red record button.

mceclip11.png

 

 

 

Download and Setup options can be set by pressing the Download Icon.

mceclip12.png

 

 

 

Device Name can be changed here. Device Description is displayed here (cannot be changed). Logging Interval and Duration are displayed here.

mceclip13.png

 

 

 

Selecting Interval or Duration allows you to modify those settings in the Logging Setup.

mceclip14.png

 

 

 

mceclip15.png

 

 

 

 

 

 

Have more questions? Submit a request

Comments

Article is closed for comments.