This purpose of this document is to guide you through how to connect to the Fluke-1732, 1734,1736 and 1738 using the USB port to your PC.
- Turn on meter.
- Plug USB cable into meters USB port, plug other end into your computer USB port.
- Go into your computers Device Manager to verify if the USB driver installed automatically by looking in the Network adapters directory. The meter will be listed as Remote NDIS Compatible Device. See below example.
- If driver did install launch the Energy Analyze Plus software and click on Download Data button top left corner of window. Select meter in Drop down menu and then click on Download. See example below. If the driver did not install go to article .Fluke-1732, Fluke-1734, Fluke-1736, Fluke-1738 How to Manually install Fluke-173X USB driver.