Keeping your world up and running. ®

Fluke-1735 Not able to communicate with Power Log Classic Software

The purpose of this article is to give you some troubleshooting ideas to solve connection issues with your Fluke instrument and Power Log Classic software. Power Log Classic software supports the following instruments: VR1710, Fluke-345, Fluke-1735 with firmware V1.10, Fluke-433, Fluke-434 with firmware V02.10 and Fluke-435.

The two main issues are either related to the USB driver or something called Active Management Technology (SOL).

On the topic of Active Management Technology (SOL) is straight forward, if it's installed on your computer it will block the USB driver from connecting to your Fluke instrument. You need to either disable it or remove it to allow the USB driver to communicate to the Fluke instrument. 


The key for the USB driver is verifying you have the correct driver and the latest version of the driver. In some cases the USB driver will install automatically and not be the latest one or didn't install completely. We have USB drivers for each of the Fluke instruments so it's not a one driver for all of the Fluke instruments. Below are the drivers available on the Fluke website for the instruments mentioned in this article. 

Here is the link to the Fluke-1735 USB driver, the name of the driver you want is Fluke 1735 345 driver.exe.


Have more questions? Submit a request


Please sign in to leave a comment.